DODGE Premium Stereo Radio Wire Harness w CAN-BUS / RAP/ REF, REC, REA & RAK. All Parts are Brand New. PREMIUM AFTERMARKET STEREO CAR RADIO WIRING HARNESS PLUG. WIRE HARNESS TO INSTALL AFTERMARKET STEREOS. WORKS WITH THESE MAKE YEAR AND MODELS BELOW.
(PREMIUM) AFTERMARKET CAR STEREO RADIO WIRING HARNESS PLUG. REF, REC, REA & RAK. WIRE HARNESS INSTALLS AFTERMARKET STEREOS w CANBUS.USE FOR AFTERMARKET NAVIGATION RADIOS THAT REQUIRE. REVERSE, PARKING BRAKE AND ILLUMINATION INPUTS. VEHICLES WITHOUT FACTORY AMPLIFIER : Connect the aftermarket radios front and rear speaker wires to the 22-pin plug. VEHICLES WITH FACTORY AMPLIFER (BOSTON ACOUSTIC SYSTEM): The factory accepts two channel audio only. The amplifer fading is controlled by data communications from the factory radio, therefore, the aftermarket radio will not have the ability to control this feature. Please connect the front outputs of the aftermarket radio to the rear inputs of the 22-pin connector. This will allow the navigation unit voice prompts to be heard. The Rear speaker outputs of the radio are not used. The factory amplifier BALANCE and FADER is set to center by the interface. The 22pin Harness has two yellow and two black wires. Connect both yellow wires to the radios +12v constant wire and both black wires to the radio's ground wire. The accessory wire is located on the 6-pin harness. Connect this wire to the radio's accessory wire. The accessory wire supplies +12V, 1 Amp maxium with the key is in the accessory or ignition position.
USE A RELAY FOR HIGH CURRENT STEREO (HEAD-UNITS). An After Market Wire Harness is used for Installing & Upgrading to a New Stereo System from Factory Radio. PLUGS directly into a cars Harness to easily allow you to install a new Aftermarket Radio (PLUG N PLAY). Harnesses require no Splicing or Cutting.
Used to install an upgraded stereo like: (ALPINE, Blaupunkt, Kenwood, Etc). THIS PREMIUM INTERFACE HARNESS WORKS WITH. RAP / CAN-BUS & AMPLIFIED SYSTEMS. Plugs Directly into factory radio harness. PREMIUM RADIOS WITH RAP / CANBUS FEATURES.
WORKS with Amplified, Bose/Monsoon/JBL & Premium Sound Systems. (THIS IS THE PREMIUM AMP VERSION WITH RAP FEATURES). P = RETAINS ACCESSORY POWER. If Radio Continues to play after key is removed from ignition. (& Radio Stays on - til door opened).
RAP feature is present: (Harness will work). FAQ: How do I check if I have an Amplified or Premium System? Branding: Bose, Jbl, Delco premium, Alpine, etc (on speaker / radio). After replacing stock head-unit (power but no sound).
Amplified systems have a built-in Sub. Owners/manual: Part number of radio. Military Bases / APO, FPO, PO Boxes. Only Pay the Duty once at a lower rate.UK, Europe, Germany, South America, Mexico. Asia, Australia, New Zealand, Japan. RADIO WIRING HARNESS PLUG FOR PREMIUM RAP/CANBUS RADIOs. Plugs Directly into factory CAR HARNESS NOTE: This harness works on: Premium RAP radios. Powered by SixBit's eCommerce Solution.
The item "DODGE Premium Stereo Radio Wire Harness w CAN-BUS / RAP/ REF, REC, REA & RAK" is in sale since Friday, December 2, 2011. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts". The seller is "vinyllust" and is located in Oceanside, California. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.