This fixed-price listing includes a Best Kits radio mounting kit, antenna adapter , radio replacement interface , and steering wheel control adapter, for select 2004 to 2008 Jeep, Dodge & Chrysler models. Provides navigation trigger wires and timed accessory output for replacing the factory radio and retains the factory installed amplified audio system.
Use the provided Steering Wheel Control output plug with a steering wheel interface module to retain function of all factory controls. This dash kit is made from factory textured ABS plastic. Includes fully adjustable ISO mounting brackets.
Features molded size pocket with rear support mounting stud. Fully illustrated instructions and mounting hardware included. Includes the radio specific Antenna adapter.Speed through your radio replacement installation when using the SWI-RC-1 to retain your factory steering wheel controls. To program the SWI-RC-1 simply go to the SWI-RC-1 installation guide from your PC, MAC or mobile device, select the make/model/year and what of brand radio you are installing, then set the DIP switches according to the information provided. In addition to DIP switch programming, the SWI-RC-1 is capable of being manually programmed like the Classic SWI-RC-1. You will also save time when using the accessory output generated by the SWI-RC-1 in CAN-Bus/LAN/Class II vehicles instead of searching for an accessory wire for your aftermarket radio. Double din dash mounting kit. Keeps Data-Bus Intact for Vehicle Service & Emissions Testing.
Data controlled RAP accessory output wire. Data controlled parking brake wire. Data controlled vehicle speed sense wire. Retains factory-installed amplified audio system.In addition to DIP switch programming, the SWI-RC-1 is capable of being manually programmed like the Classic SWI-RC. Mounting kit will not fit into the dashboard. If replacing the factory navigation radio, the bezel is already in place. Currently, we don't have the additional navigation bezel available at our store. Currently will not retain factory Blind Spot Detection system unless vehicle is equipped with factory VES or amplified system.
In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo. Kit only compatible when replacing a factory navigation unit.
Due to in dash depth restrictions some radios may not fit dash opening. Some installations may require minor kit modifications.
Works only on double din aftermarket radio installations. The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible ex. A port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc. Does not retain the HVAC controls found in some General Motors vehicles. Only Compatible with the vehicles listed above.This is what most consider is the hardest part of the installation. With this diagram; installation is a piece of cake. Vehicles NOT made for the U. Market are not compatible and are not guaranteed. The item "Radio Replacement Interface & Steering Wheel Controls Adapter withDash Kit/Antenna" is in sale since Tuesday, February 5, 2013. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts".1" and is located in Miami, Florida.
This item can be shipped worldwide.