Thank you for stopping by! We specialize in automotive aftermarket installations and iPod/iPhone integration for both OEM and aftermarket radios. Have any questions and/or comments? Our customer service team is ready to help. This fixed-price listing includes a double DIN dash kit from American International, a radio replacement interface and steering wheel controls adapter from PAC, along with the antenna adapter, for select Chrysler, Dodge, Jeep vehicles.
The radio replacement interface provides navigation trigger wires and timed accessory output for replacing the factory radio and retains the factory installed amplified audio system. Use the provided steering wheel control output plug with a steering wheel interface module to retain function of all factory controls.
Speed through your radio replacement installation when using the SWI-RC-1 to retain your factory steering wheel controls. To program the SWI-RC-1 simply go to the SWI-RC-1 installation guide from your PC, MAC or mobile device, select the make/model/year and what of brand radio you are installing, then set the DIP switches according to the information provided. In addition to DIP switch programming, the SWI-RC-1 is capable of being manually programmed like the Classic SWI-RC-1.
You will also save time when using the accessory output generated by the SWI-RC-1 in CAN-Bus/LAN/Class II vehicles instead of searching for an accessory wire for your aftermarket radio This kit is made of factory textured ABS plastic. There is no cutting required for DIN applications and it has a recessed DIN opening. Features custom designed mounting brackets, DIN sleeve support rails and ISO mount capability. Includes custom ISO trim ring. Matches perfectly to dash contour.
Comes with convenient factory trim bezel locator nubs. Includes all mounting hardware and fully illustrated instructions. Keeps Data-Bus Intact for Vehicle Service & Emissions Testing. Data controlled RAP accessory output wire. Data controlled parking brake wire.Data controlled vehicle speed sense wire. Retains factory-installed amplified audio systems. Quick and easy pre-programmed button function by DIP switch selection. Works on Analog (resistive) and Data SWC systems. For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC.
Supports classic, SWI-RC-1 style button programming. Customizable button functions (short press/long press/button reassignment). Provides 2 amp, 12volt accessory output (CAN-Bus, LAN and Class II applications).
Compatible with all late model brands of radios with 3.5mm or two wire connections. Due to in dash depth restrictions some radios may not fit dash opening. Some installations may require minor kit modifications. Works only on 2-DIN, aftermarket radio installations.ALL PAC and American International devices and hardware are designed to be compatible with Major-Brand radios. Non Major-Brand radios are not recommended. Currently will not retain factory Blind Spot Detection system unless vehicle is equipped with factory VES or amplified system. In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo. Does not retain the HVAC controls found in some General Motors vehicles. The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible ex. A port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc. Compatible With the Following Vehicles. Only compatible with the vehicles listed above. This is what most consider is the hardest part of the installation. Vehicles NOT made for the U. Market are not compatible and are not guaranteed. The item "Radio Replacement & Steering Control Interface Dash Kit 2-DIN for Dodge/Chrysler" is in sale since Monday, February 4, 2013. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts".1" and is located in Miami, Florida. This item can be shipped worldwide.